Description: UVA™508 is a UV curable pressure sensitive adhesive, mainly used in UV curing adhesive of electronic products. Give excellent adhesion performance and long-term adhesion. It not only has insulation, high durability, water resistance, but also is highly transparent, safe and non-toxic, without any solvents. It has a wide range of applications in electronic products, especially in the field of peeling off and residue free.

Performance：

✪ Less shrinkage during curing            ✪ Ink transfer, peelable and no residue

✪ Fast curing speed                            ✪ High transparency and cohesion

✪Acid, alkali and sunlight resistance.   ✪ Coating up to 180g/m²

✪ Water and yellowing resistance        ✪ Excellent aging and heat resistance

Specification ：

Application：

- UV curing adhesive for electronic products

- Can be used for conventional hot melt adhesive coating equipment. The recommended coating temperature is 130 ℃ and not higher than 150 ℃. According to the thickness of the coating, the curing conditions will be changed. When 120 W / cm UV lamp is used, the coating speed can be 10-100m / min.

Performance might has some variation based on different application and formulation, please test before use

Package： 190 kg/drum

Storage and Operation：Under room temperature, keep in dry. Shelf life is one year; please refer to MSDS for operation.