UV Pressure Adhesive UVA 50
UV Pressure Adhesive UVA 50
Description
UVA™50 is a UV curable pressure sensitive adhesive. It is mainly used in UV curing adhesive tape, industrial label, automobile glass film and external wall glass film. It can give excellent adhesion performance and long-term adhesion in ordinary and medical self-adhesive, label, glass film; it not only has high durability and moisture resistance, but also significantly improves the skin tolerance; it is highly transparent, safe and non-toxic, without any solvents; it has a wide range of applications in automobile, construction, medical, cosmetics, food, beverage, beverage, express bill, etc Especially in the field of peeling off and residue free.
- Overview
- INQUIRY
Description: UVA™50 is a UV curable pressure sensitive adhesive. It is mainly used in UV curing adhesive tape, industrial label, automobile glass film and external wall glass film. It can give excellent adhesion performance and long-term adhesion in ordinary and medical self-adhesive, label, glass film; it not only has high durability and moisture resistance, but also significantly improves the skin tolerance; it is highly transparent, safe and non-toxic, without any solvents; it has a wide range of applications in automobile, construction, medical, cosmetics, food, beverage, beverage, express bill, etc Especially in the field of peeling off and residue free.
Performance:
✪ Less shrinkage during curing ✪ Ink transfer, peelable and no residue
✪ Fast curing speed ✪ High transparency and cohesion
✪Acid, alkali and sunlight resistance. ✪ Coating up to 180g/m2
✪ Water and yellowing resistance ✪ Excellent aging and heat resistance
Specification :
Item |
Specification |
Appearance |
Viscous Liquid Paste |
Content (%) |
100 |
Glass transition temperature,( ℃) |
-30 |
Application:
- UV curing labels for beer, cosmetics, drinks, food and express bills.
- UV curing film in car glass and external wall glass.
- UV curing medical tap and band-aid
- Can be used for conventional hot melt adhesive coating equipment. The recommended coating temperature is 130 ℃ and not higher than 150 ℃. According to the thickness of the coating, the curing conditions will be changed. When 120 W / cm UV lamp is used, the coating speed can be 10-100m / min.
Performance might has some variation based on different application and formulation, please test before use
Packing: 200 kg/iron drum
Storage:in the cool and dry ventilated places in 1 year. Please operate as per MSDS.